Your RIKA code: You can use your personal RIKA code to continue planning your configuration at any time. Simply enter the code in the search field on www.rika.eu/configurator.

The PARO combi stove combines the advantages of a wood-burning stove with those of a pellet stove and also cuts a very good figure visually. Combine this with a particularly high level of user-friendliness and automatic ignition, and you have everything you could wish for. The PARO has a storage mass of 65 kg and a capacity range of 2.5 to 8.0 kW. It also has a pellet container with a capacity of up to 30 kg. The stove is operated independently of the room air, but without a self-locking door. (Please note the different country regulations)

Rear and top connection possible. If the flue pipe is connected at the top, the condensation pipe Ø130 (E16883) must be used. We also recommend the condensate pipe when using the original angle pipe. A safe stove connection. The original RIKA flue pipes are reliable, resistant, durable and precisely matched to the requirements of the RIKA stove models. The company places the same high quality demands on the pipes as it does on its stoves.

The PARO is available in our range with the side cladding variants stone white, soapstone and black.* *Please note that the stone claddings of the RIKA stoves are natural products. Each stone is unique, so your stove will also be unique. It is therefore not possible to order a special stone grain.

RIKA MULTIAIR transports air heated by the stove to up to two other rooms, which are heated with it. This technology gets the best out of every flame. Connecting pipes transport the convection air into the adjacent rooms. As with every RIKA stove, the installation room itself is primarily heated by radiant heat and natural convection. The RIKA MULTIAIR fan operates quietly and the stoves can therefore be installed in any living area without restriction.

The RIKATRONIC3 electronic stove control regulates combustion and combustion air fully automatically and signals the optimum time for adding fuel. The electronics are sensor-controlled for greater efficiency, lower emissions and optimum fuel utilisation with up to 50% less wood consumption compared to manual control. With RIKATRONIC3, you can heat comfortably and efficiently according to the motto: insert the wood, light it and enjoy the cosy warmth.

The base plate is always located under the stove to protect sensitive floor coverings from dirt, wear and burn marks. They are therefore the indispensable foundation for a stove in most cases.

The base plates are available in the colours black, metallic, neutral, smoked glass, sandblasted and transparent.

The RIKA room sensor allows you to regulate the room temperature at the sensor's location. By means of cable connection or radio transmission, the control of your RIKA stove is dynamically adapted and always adjusted with regard to your desired temperature.

Environmentally friendly, clean and odourless - The RIKA eco-lighters are perfect for easily lighting the fire in your stove with RIKATRONIC4.

With this option, you have the option of installing the touch display of your RIKA stove externally and thus making operation even more convenient.

The room thermostat detects the room temperature and when the desired heat level is reached, your stove switches off automatically. You can set the switch-on and switch-off times as well as the desired room temperature via the thermostat.

With RIKA FIRENET, you can control your pellet stove when, where and how you want - easily via any PC or mobile device with internet access.

Shim glass protect the immediate area in front of the stove. They ensure fire protection and are required by law for combustible floors. The shim glasses score with their simple design and are available in various sizes.